Design for Manufacturing (DFM) & Quality Assurance

24h
DFM Turnaround
Free CAD manufacturability report
±0.005 mm
Precision Tolerance
Verified on Zeiss 3D CMM
Level 3
PPAP Documentation
PSW, FMEA & Control Plan standard
EN 10204 3.1
MTR Certification
100% heat-lot chemical & mechanical
Pre-Production Engineering Optimization

Free 24-Hour Design for Manufacturing (DFM) Review

Before cutting chips or building tooling, our senior manufacturing engineers perform an in-depth CAD manufacturability audit to eliminate tool deflection, optimize raw material yield, and cut production costs by 15% to 35%.

Tool Clearance

Tool Accessibility & Deep Pocket Cavities

We analyze internal cavity depths and tool shank clearance to prevent excessive tool stick-out, chatter, and cutter deflection. Keeping cavity depth within 4x cutter diameter reduces machining cycle time and prevents tool breakage.

15% - 25% Cycle Time Reduction
Geometry

Internal Corner Radii & Fillet Geometry

Square internal vertical corners require costly EDM (Electrical Discharge Machining). Our engineers suggest optimal radii (r >= 1/3 cavity depth) enabling high-speed end milling with standard carbide tooling.

Eliminates Costly Secondary EDM
Part Rigidity

Wall Thickness & Rigidity Feasibility

Thin walls deflect under cutting pressure and vibrate during high-speed CNC milling. We check and recommend minimum safe wall thicknesses (min 0.8mm for aluminum, 1.2mm for steels) to avoid geometric warping.

Zero Part Warping & Rejections
Tolerances

Tolerance Rationalization & GD&T Review

Specifying blanket tight tolerances (e.g. ±0.005mm) across non-critical cosmetic surfaces inflates inspection and machining costs. We help isolate true critical press-fit zones from general surfaces.

20% - 35% Production Cost Savings
Threading

Thread Pitch & Hole Standardization

Custom or non-standard thread pitches require custom-ground threading taps. We recommend standard metric ISO or Unified (UNC/UNF) threads and ensure blind-hole tapping depths include proper thread relief.

Standard Off-the-Shelf Tooling
Material Yield

Material Selection & Machinability Index

We review raw material specifications against functional requirements. Where applicable, we suggest high-machinability alternatives (e.g., 12L14 vs 1018, CW614N vs C36000, 6061-T6 vs 7075) to achieve equivalent strength with faster speeds.

Optimized Raw Material & Tool Life

Accepted 3D CAD & 2D Engineering Formats

Upload your CAD model alongside 2D PDF drawing with critical tolerances, material spec, and surface finish.

Submit CAD for DFM Review→
STEP / STP
AP203 / AP214 standard 3D solid model (Recommended)
IGES / IGS
Universal 3D surface and wireframe exchange format
SolidWorks (.sldprt)
Native SolidWorks 3D parts and assemblies
Parasolid (.x_t)
Native Parasolid boundary-representation solid
DWG / DXF
2D engineering drawings with GD&T annotations and tolerances
PDF Drawing
2D dimensioned drawing with title block, finish, and material spec
Transparent Execution Pipeline

From Digital CAD to Quality-Verified Delivery

Our ISO 9001:2015 certified workflow ensures every component is checked for manufacturability, cost efficiency, and dimensional conformance before bulk shipment.

01

Submit 2D & 3D Drawings

Upload your CAD file (STEP, IGES, SolidWorks) along with a 2D PDF drawing detailing critical tolerances, threads, surface finish, and material grade.

02

24-Hour Engineering DFM Audit

Our senior manufacturing engineers review tool accessibility, draft angles, clamping fixtures, wall thicknesses, and tolerance stack-ups.

03

Actionable Feedback & Quote

Receive an annotated engineering report highlighting potential manufacturing risks, cost-saving recommendations, and a formal fixed-price quote.

04

Prototype & Mass Production

Upon design approval, pre-production sample parts are run and validated via PPAP Level 3 documentation before mass CNC manufacturing.

Climate-Controlled Inspection Lab

Zeiss 3D CMM & Metrology Equipment Matrix

Operating a temperature-controlled metrology laboratory (20°C ± 1°C) to back our ±0.005mm tolerance claim with calibrated coordinate measuring data and non-contact optical inspection.

Equipment & ModelManufacturer / BrandResolution & AccuracyInspection Application
3D Coordinate Measuring Machine (CMM)Zeiss / MitutoyoE0,MPE: 1.9 + L/300 µm3D complex geometry, GD&T position, concentricity, circularity & runout verification
Optical Profile ProjectorMitutoyo PJ-A300020x & 50x Magnification / 1µm resolutionNon-contact 2D contour inspection, chamfers, radii, thread angle & pitch profile
Surface Roughness TesterMitutoyo Surftest SJ-210Ra resolution: 0.001 µm (Range: Ra 0.05 - 10 µm)Surface finish verification across milled, turned, ground, and honed faces
Optical Emission Spectrometer (OES)Foundry-Master ProPPM chemical element detectionPositive Material Identification (PMI) & melt-heat chemical composition compliance
Digital Height Master & MicrometersMitutoyo Digimatic series±0.001 mm (1 micron)High-precision step height, outer diameter (OD), inner diameter (ID) and depth inspection
Hardness Testing SystemsRockwell & Brinell Durometers±1.0 HRC / HBW calibratedCase hardening depth, core hardness, and post-heat treatment metallurgical verification
Thread Plug & Ring GaugesCalibrated Class 6g / 6H / 2A / 2BNIST / NABL traceable calibration100% thread fit, go/no-go verification on internal and external threads
Air Electronic Gauging SystemAccu-Air Multi-Channel±0.0005 mm (0.5 micron)High-speed precision bore diameter, taper, and ovality measurement
Automotive & Industrial OEM Compliance

PPAP Level 3 & EN 10204 3.1 Documentation Package

Global OEM buyers require verifiable documentation before component sign-off. We deliver complete traceability from mill raw material heat-lots to final dimensional balloon drawings.

PSW

Part Submission Warrant

Authorized engineering sign-off confirming components meet all OEM prints, engineering standards, and functional specs.

PFMEA

Process FMEA & Control Plan

Failure Mode and Effects Analysis identifying failure risks and establishing strict process control gates from raw stock to shipping.

DIM

Ballooned Dimensional Report

100% ballooned 2D engineering drawing with corresponding CMM coordinate data for every print dimension.

MTR

EN 10204 3.1 Material Test Certificate

Mill heat-lot chemical analysis and mechanical tensile/yield reports providing complete raw material traceability.

MSA

Measurement Systems Analysis (Gage R&R)

Statistical validation proving that inspection gauges and CMM systems have repeatability and reproducibility under 10%.

SPC

Statistical Process Control Studies

Capability studies demonstrating process capability index (Cpk >= 1.67) for all critical-to-quality (CTQ) dimensions.

Core Quality Tools Applied in Every Batch

APQP
Advanced Product Quality Planning
FMEA
Failure Mode & Effects Analysis
SPC
Statistical Process Control
MSA
Measurement Systems Analysis
PPAP
Production Part Approval Process
8D
8-Discipline Problem Solving
Control Plan
Dynamic Process Control Plans
Certified Engineering Alloys

Raw Materials & Machinability Compatibility

Complete chemical and metallurgical compliance across carbon steels, stainless steels, brass, bronze, and aircraft-grade aluminum.

Material CategoryStandard GradesRelative MachinabilityKey Applications
Alloy Steel4140, 4340, 8620, 20MnCr565% - 75%Transmission shafts, heavy hydraulic pins, precision gears
Carbon SteelAISI 1018, 1045, 12L1480% - 130%High-volume turned fittings, bushings, threaded fasteners
Stainless SteelSS 304, 316L, 416, 17-4 PH45% - 85%Marine valves, chemical flanges, food processing components
Brass & BronzeIS 319, CW614N, CZ121, Phos. Bronze100% - 140%Hydraulic valve manifolds, hex nipples, self-lubricating bushings
Aluminum Alloys6061-T6, 7075-T6, 2024, ADC1290% - 150%Aerospace brackets, electronic heat sinks, automotive lightweighting
Zero Commitment • 24-Hour Engineering Turnaround

Ready to Optimize Your Component for Production?

Upload your 2D drawings and 3D CAD models. Our senior manufacturing engineers will analyze tool accessibility, tolerance stack-ups, and deliver cost-saving recommendations within 24 hours.

24-Hour TurnaroundNon-Disclosure Agreement (NDA) ProtectedISO 9001:2015 Certified
Frequently Asked Questions

DFM & Quality Assurance FAQs

Detailed answers regarding design optimization, inspection metrology, tolerances, and OEM certification.

What is a DFM (Design for Manufacturing) review?↓

A DFM review is an engineering evaluation of your 2D and 3D CAD files before production begins. Our manufacturing engineers analyze tool accessibility, internal corner radii, wall thicknesses, and tolerance stack-ups to eliminate manufacturing bottlenecks, prevent part rejections, and lower unit machining costs by 15% to 35%.

How fast will I receive my DFM review report from Fedele Autocore?↓

Fedele Autocore provides a comprehensive DFM review within 24 to 48 hours of drawing submission. For urgent prototyping programs, expedited same-day DFM reviews are available upon request.

What 3D CAD and 2D drawing file formats do you accept?↓

We accept all industry-standard CAD file formats including STEP (.step, .stp), IGES (.iges, .igs), SolidWorks (.sldprt, .sldasm), Parasolid (.x_t), and DXF/DWG. We also require a dimensioned 2D PDF drawing specifying critical tolerances, thread details, surface finish (Ra), and material grade.

What CMM accuracy and inspection capabilities does Fedele operate?↓

Our climate-controlled metrology lab features Zeiss and Mitutoyo 3D Coordinate Measuring Machines (CMM) with volumetric accuracy of (1.9 + L/300) µm, optical profile projectors with 20x/50x magnification, Mitutoyo surface roughness testers (Ra down to 0.05µm), and optical emission spectrometers (OES) for positive material identification.

Do you supply PPAP documentation for automotive and OEM orders?↓

Yes. We regularly furnish PPAP Level 1 through Level 5 documentation packages. Level 3 is our standard for production orders, including the Part Submission Warrant (PSW), Process Flow Diagram, PFMEA, Dimensional Inspection Report with ballooned drawings, Material Test Reports (EN 10204 3.1), and Gage R&R studies.

Can you provide raw material test reports (MTR) with heat-lot traceability?↓

Yes. Every shipment includes certified EN 10204 3.1 inspection certificates documenting the exact chemical composition, tensile strength, yield strength, and hardness for the specific raw material heat-lot used in production.

What machining tolerances can Fedele Autocore reliably hold in mass production?↓

On precision CNC turning and milling centers, we hold tolerances of ±0.005mm (5 microns) on critical diameters, concentricity within 0.005mm, and surface finishes down to Ra 0.4µm (16 µin). On sheet metal laser cutting, we achieve positioning accuracy of ±0.05mm.

Is the DFM review free of charge?↓

Yes, our engineering DFM review is 100% free with no commitment required. We consider DFM an essential collaborative first step to ensure smooth manufacturing, fast delivery, and competitive pricing for global OEM buyers.